Berenstain Bears Halloween costumes

We did another full-fledged family costume this year for Halloween. Last year it was Jake and the Neverland Pirates. This year: Berenstain Bears (yes, that’s how it’s always been spelled).

halloween2016-09

Corban discovered the Bear family thanks to the extensive collection of books my parents have from when I was a kid, and these past few months we have been compelled to read multiple Berenstain Bears books a day. You can’t get away with shortcuts with Corban either—he notices if you skip so much as a sentence.

This is a good thing, though: good moral lessons, childhood reminiscence, enjoyable storylines. Naturally, Corban draws connections between the Bear family and our own family of four. He is Brother Bear, Mara is Sister Bear.

So despite a new Star Wars obsession that has them plotting next year’s costumes already, they were excited to dress up as the Bear family for Halloween.

You can’t just go out and buy a Berenstain Bears costume (I looked and came up empty), so we had to get a little bit creative.

Thankfully, I came across this Etsy shop, which sells handmade embroidered Berenstain Bears masks. They only come in kids sizes, so they looked slightly off on Peter and me, but they were perfect for the kids. Without these masks the costumes would have been really obscure, especially since the Berenstain Bears are not normal-looking bears.

Brother Bear was the easiest: blue sweatpants and a red long-sleeve polo (found at Old Navy).

halloween2016-08

Papa Bear was simple, too: Overalls and a yellow plaid shirt.

My original plan for Mama Bear was to buy a blue nightgown and paint white polka dots onto it, but upon realizing how expensive even the most basic long-sleeve nightgowns and dresses are (at least the ones that I could find), my mom offered to sew me a dress. She has years of sewing experience and has made many Halloween costumes throughout my life, and I’m grateful for her expertise and eagerness to help! She used blue polka-dot fleece fabric and modified a basic dress pattern, adding a white collar.

Sister Bear was my project. For her shirt, I just used fabric paint to paint pink polka dots onto an old long-sleeve shirt of Corban’s. I could have bought a pair of regular pink overalls, but Sister’s overalls are slightly different—they have scalloped straps and a straight line across the front and back (no bib). So after hunting around unsuccessfully, I got inspired by something I saw on how to turn an old pair of jeans into shorts overalls.

halloween2016-07

I bought two pairs of pink fleece sweatpants (thank you, Walmart) and went to town. First, I cut two rectangles out of one leg of one of the pairs of pants in order to bring the waistline up to nearly chest-height. I sewed those two pieces together then sewed them to the waist of the other pair of pants.

halloween2016-03

Unfolded:

halloween2016-04

No hemming needed with fleece; yay!

For the straps, I put the newly modified pants on Mara, measured the length the straps should be and cut a scalloped pattern out of poster board.

halloween2016-01

I took the other extra pant leg and cut along the seams to create two long rectangles of fabric. I folded each long rectangle in half lengthwise and cut the scalloped line out of the open side. Then I pinned the edges to prepare to sew them:

halloween2016-02

I carefully sewed along the scalloped edge.

halloween2016-06

Then I turned them inside out and ironed them flat (in the photo below, the top strap shows it before being turned inside out and the bottom one after).

halloween2016-05

I sewed the front of the straps to the front of the pants, and my mom sewed snaps onto the inside of the back straps and back of the pants. The snaps ended up being unnecessary, though; Mara just pulled the straps up over her arms. I did end up pinning the shoulders of her shirt to the straps so they wouldn’t fall down (thanks to the double layers of fleece, you couldn’t see the pins).

halloween2016-10

Oh, and the kids were super excited to wear these gorilla feet slippers we spotted at Walmart. They look enough like bear feet, I guess. They weren’t the easiest to walk in while trick-or-treating, though.

I also concocted some furry gloves for all of us by sewing some felt pieces to cheap cotton gloves to make it look like fur was coming out of our sleeves. If I were to do that again I would have hot-glued the felt…my quick hand-sewing job didn’t really hold up. Mara also refused to wear them, so there’s that.

It was a fun Halloween weekend: costumed play date party Friday morning, adult party Friday night (my solo Mama Bear costume isn’t quite as cute without the rest of the fam…), pumpkin carving and trick-or-treating Sunday and a Halloween party for the kids at our gym this morning.

14883513_10104365931006220_4755394197375787757_o

Hard to believe we are entering November already!

Past years’ Halloween costumes: Pirate/Tinkerbell (2015) | Peter Rabbit/bumble bee (2014) | mouse/cat (2013) | lobster (2012)

Advertisements

Jake and the Neverland Pirates Halloween costumes

Corban’s favorite TV show is “Jake and the Neverland Pirates”—it’s a spinoff of Disney’s “Peter Pan” about a crew of nice pirates (Jake, Izzy and Cubby) who interact with Captain Hook, Smee and their gang. He’s been in full Jake/pirate mode since last year, so naturally he wanted to be Jake for Halloween.

halloween2015-4b

Of course this is the prime age for adorable coordinating sibling costumes, so I convinced Mara to be Tinker Bell (she makes a guest appearance on the show once in a while—it’s set in Neverland, after all).

halloween2015-3b

Corban wanted to get the whole family involved, including stuffed animals, so Peter dressed up as Smee and I was Izzy. The stuffed animals were on their own for costumes, though. (Corban sighed last night, “But Quacky doesn’t have a Scully costume…”)

After browsing the costume selection available online, I decided it would be fun and easy to make all of our costumes.

Fun, it certainly was. Easy? Well, that would be a stretch. It was definitely doable, but all the little details added up and this ended up being the most ambitious costume undertaking I’ve attempted.

But I really did have a blast putting all four costumes together, and I’m pleased with how they turned out.

If you’re looking to make a DIY Jake, Izzy, Smee or Tinker Bell costume, read on for details on each of them.

First, some highlights from our Halloween:

halloween201506

Halloween crafts at the library, and the first test run of the costume. 

halloween2015-6

Somehow we wrangled 15 kids into a Halloween party photo.

halloween2015-5

There’s my Izzy costume.

halloween201502

halloween201500

This poor pumpkin didn’t stand a chance.

halloween201507

Carved a pirate pumpkin.

halloween201508

And got a little fancy.

halloween201501

Eager to start trick-or-treating.

halloween201503

Tink didn’t end up doing much walking. Plus, it was cold and misting.

halloween201504

Pretty good haul. I showed them how to sort their candy.

Now, for the costume tutorials…

 

jakefamilycostumes

Jake the pirate

There are three basic parts to a Jake costume: The shirt, the vest and the boots. Let’s start with the easiest one.

Jake’s T-shirt

White T-shirt
About 10 inches black ribbon

Cut the collar and sleeve hems off the T-shirt. Cut a few slits in each sleeve and make a 3- or 4-inch cut down from the middle of the collar.

jake00

Cut two slits on each side of that cut and slide a black ribbon through to form a loose X. Tie the ribbon at the bottom inside the shirt.

Jake’s vest

Navy blue T-shirt
Yellow bias tape (found in the sewing department of a fabric/craft store—it is more like ribbon)
Fusible bonding web (such as Stitch Witchery)
4 yellow buttons
Yellow thread and needle

Cut off the shirt’s sleeves and collar and cut straight down the middle of the shirt to make a vest.

jake1

The 3T shirt ended up being a little too small, so for the final version I used a 5T (Corban is 3, going on 4).

Iron the bias tape to remove any creases. Iron the vest to make a collar.

jake2

Starting from the bottom of one flap of the vest, use the bonding web to attach the bias tape along the edge of the shirt. Since bias tape consists of several layers folded lengthwise, I actually attached mine around the edge—using bonding web on both the inside and outside of the vest. This looks nicer than just attaching it to the outside of the vest.

jake01

Work your way along the edge of the shirt, lining the flap of the collar*, around the back of the neck**, back down the other collar and around the back of the vest, cutting the bias tape into sections as needed (I used six separate sections of tape).

*I attached part of the collar flap to the shirt with bonding web to help keep it in place:

jake02

**”Pop” the collar up as you go around:

jake03

Sew two buttons on each side of the vest. (Side note, why are buttons so expensive?! It took me a good hunt to find inexpensive yellow buttons that were the right size and color.)

Jake’s boot covers

This was a serious challenge for me, so I’m pretty proud that they turned out. They fit over shoes and are a lot cheaper than Uggs (plus, you can paint Jake’s signature “J” on them). Here’s what you need:

4 yards brown felt
This pattern
Yellow paint (I just used some acrylic I had)

jake04

I followed this tutorial. The biggest challenge was to decipher the instructions since they were a bit confusing at parts. One thing I didn’t realize until my mom stepped in to help is that “right sides” in sewing lingo means the sides you want to show in the end, not the sides opposite the left. With felt, it doesn’t matter, but knowing that will help clarify the linked instructions. Another helpful hint: at the start of step 5, turn the boots rightside out.

One thing we (my mom) added was to fold and hand stitch the tops of the cuffs into the boot. (Yikes, it’s not easy writing sewing instructions!)

jake05

After the boots are constructed, use a paintbrush to paint a solid gold rectangle on the tops of the feet and Js on the insides of the cuffs. Strangely, the J on Jake’s left boot is a mirror image of the right, so it’s backwards. (I’ve Googled “Jake pirate” images an embarrassing number of times while working on this costume.)

halloween2015-1b

Other Jake elements

Red headband—just a thick strip of red fabric (we already had one from a pirate costume I’ve worn)

Hair—Find some mega extreme hold hair gel (that’s how the one I used marketed itself) and spike that hair straight up in front.

Thick black belt/cummerbund—you could cut up an old T-shirt or do what I did and tie a pair of black tights around your son’s waist (tuck in the ends in the back)

Wooden sword—Peter insisted we buy this instead of attempt to make it. I’m glad we did even though we payed way more than we should have on Amazon for an apparently discontinued Disney Store set of Jake accessories. It’s foam and nice and Corban loves it, plus it came with a spyglass (much better than the paper towel roll I had planned) and pouch of gold dubloons.

Tinker Bell

There are a lot of routes you can take with Tinker Bell. I wanted to be as authentic to the Disney version as possible while making it appropriate for a two-year-old (um, look at Tink…she is a mature, scantily clad woman).

My plan was to do something like this, but use a leotard instead of sewing the body myself. I found an adorable mint green leotard, but at the last minute decided the mint green didn’t look right, so ended up hand-sewing an alternative last night. It was a smart move. Here are the elements of our toddler Tink costume.

Tinker Bell’s skirt

1 1/4 yards green fabric (get something that won’t fray)
Matching green thread
Non-roll elastic (for the waist)
Ruffled ribbon/trim (for the waist)
1 roll cream or white tulle
Thin elastic (for the waist of the tutu)

I followed this tutorial for the skirt. It was simple, even for a sewing novice like me. The ruffled ribbon is a good addition to cover up the seam along the waist.

tink01

Tulle tutus are the easiest thing to make. Just loop-tie strips of tulle to a thin elastic waistband. It’s a fun touch for under the Tinker Bell skirt.

tink02

Tinker Bell’s top

White long sleeve shirt
Leftover green fabric from the skirt
Matching green thread

Cut and pin green fabric to the shirt, starting under the arm on one side and continuing all the way around the shirt. Hand stitch the fabric to the shirt, then stitch it down the side. You’ll tuck the shirt in, so don’t worry about the bottom.

tink00

Tinker Bell’s wings

This took me a bunch of finagling and trial and error. I will try to explain what I did, though.

2 white wire hangers
Pliers
1 pair white adult women’s tights
Small piece of tape
Thin elastic
Glitter glue (optional—I never ended up adding it)

Tink’s wings each have a tall pointed section on top and a smaller, round part on bottom. For a toddler, one hanger is plenty large enough for each wing. First, untwist the necks of the hangers and use pliers to form each into the shape of the wings. Leave a few inches of the end sticking out from the middle and use that part to hook the two wings together by twisting them around each other.

tink1

Now, unhook the wings from one another (stay with me for a minute). Cut the legs off the tights and stretch them tightly over the wings starting over the top section of wing. I twisted them a little in between the two wing sections to help keep the shape, then pulled the open end of the tights back up to the middle after going over the bottom section.

Poke the end of the wire (the part that will hook the wings together) through the tights once the tights are in place. Now, re-connect the wings. The ends of the tights will just be hanging out for now. Wrap tape around the connecting pieces of wire to keep them together (it’s OK if it’s not totally secure at this point).

Tie the thin elastic into a loop that will fit across your little one’s back and hook around her arms. Poke the elastic into the hole of the tights on one wing and finagle it to loop around a section of wire inside, then repeat on the other wing so the wings now have elastic straps coming out from the middle.

Tie the loose ends of the tights together around the connecting wire, pulling one leg around the back, then tying it together with the other leg on the side of the wings that will be facing out (the side without the elastic straps), then bringing both sides around to the side with the elastic and tying them together there (so the legs are tied together on both the front and the back of the wings).

tink03

tink04

Paint glitter onto the wings if desired.

Tinker Bell’s magic wand

1 chop stick or other thin, wooden stick
Silver washi tape
White or cream tulle

Wrap washi tape around the stick in a spiral motion to cover.

Make two tulle pom poms. To make each, cut 20-30 4-inch strips of tulle (1/2-inch-wide). Lay a wider (2- to 3-inch-wide) 4-inch strip of tulle down and stack the 20-30 strips perpendicular on top of it. Tie the thicker strip around the center of the stack of strips and knot it tightly, then knot the ends around the end of the tape-covered stick. Repeat to make the second pom pom and tie it to the same end of the stick but on the opposite side. Tape the ends of the tulle strips you used to tie the pom poms together down to the stick, using the same spiral taping motion to cover them completely.

Separate the 1/2-inch strips in all directions to form a puffy ball, trimming where necessary to form a sphere around the tip of the stick.

halloween2015-2

Other Tink elements

Shoes—Make tulle pom poms as described above, but tie or pin them to the toes of a pair of white or green ballet flats (technically Tink wears green shoes).

Hair—She wears her hair in a high bun with a little ribbon around it and bangs sweeping down and to the side.

Izzy the pirate

Izzy’s shirt

Light pink T-shirt
Darker pink permanent marker

Cut the hems off the sleeves and bottom of a light pink T-shirt. Cut wide scallops around the bottom and sleeves. Outline the edges in marker, adding loops between each scallop. Outline the neckline, adding an upside down V shape at the neck (I messed this part up so it looks pretty bad).

izzyshirt

Izzy’s bandana

Medium pink bandana or old T-shirt
Light pink fabric paint

If using an old T-shirt, cut the hem off the bottom, then cut straight up the middle as high as you can get before hitting graphics, or up to about the sternum or mid-back. Cut all the way around the shirt from that point, so you end up with a large rectangle. Cut it into an obtuse triangle.

izzy00

Paint loops and dots along the edge of the triangle, as pictured.

izzy01

Izzy’s pouch necklace

8-inch circle of yellow fabric
24-inch strip of felt (1/4- to 1/2-inch wide) or two 12-inch strips (or use brown yarn, string or cord)

We had a pouch lying around so I just used that, but you can easily make one by cutting a circle from yellow fabric and gathering the edges together to form a pouch. Tie the felt strips or string around the top to secure it. On the show, this pouch contains pixie dust.

Other Izzy elements

Hair—Pigtails, or if your hair is really long like mine then add braids in to keep it under control. Wrap strips of brown felt around each pigtail. Corban called me out because Izzy has a piece of hair sticking out from the front, so if your hair is the right length to do that, you should probably do it.

Boots—I just wore my Minnetonkas, but you could make boot covers like the Jake ones I made, just without the painted parts (note the pattern I used is for toddler size 8 to 10).

Pants—Izzy wears purple pants. I found these purple fleece-lined leggings on Amazon for $5. They are super warm and comfy, though not the greatest quality (but hey, only five dollars!).

Earrings—Like any good pirate, Izzy wears gold hoop earrings.

halloween2015-famb

Smee

This is oh so easy, hence the reason I switched from the original plan of Peter being Captain Hook.

Hat—Bright red stocking cap.

Shirt—Blue and white striped T-shirt.

Shorts—Royal blue (it was cold so Peter wore jeans).

Glasses—He wears round glasses on the tip of his nose. (Forgot this.)

Belly—Stuff a pillow in if you don’t naturally have a pot belly. Peter was going to, but ended up not bothering.

My mini mouse (an easy DIY costume)

My mom made almost all of the Halloween costumes I can remember from my childhood. Bride, witch, Barbie doll, Grinch (my brother)… she found patterns to sew, and when there was no pattern she made up her own. I didn’t realize at the time just how much work it was, but I loved every Halloween costume and went all out with it every year through high school, and even college (though by then I was putting together my own costumes).

I would love to do the same for my kids, but this year I found myself browsing Pinterest with less than one week until trick-or-treating, still undecided about Corban’s and Mara’s costumes. At that point, it had to be something simple if it was going to be homemade.

Then I found a pair of mouse ears from my sophomore year of college, when two friends and I dressed up as the three blind mice.

threeblindmice

(I forgot how un-mouse-like that costume actually was…)

Bingo! It would be easy to make him a simple mouse costume, and Mara could even be a cat.

It only took one (long) naptime to make this costume, and I didn’t have to buy anything at all!

mousecostume

Here’s what I used:

Gray sweatshirt or jacket (light gray is best, but I used what we had)
Gray sweatpants
Two 8 1/2 x 11-inch sheets light pink felt
One 8 1/2 x 11-inch sheet gray felt
Needle and thread
EyelinerMouse ears

I cut one sheet of the pink felt to make the pink belly, and sewed it onto Corban’s gray fleece jacket using only a handful of single stitches spaced a few inches apart. I wanted to be able to easily remove it after Halloween without any damage to the jacket.

mousecostume1

I just pulled it over his head to put it on him come trick-or-treat time.

I decided to make mouse paw mittens, which aren’t really essential to the costume, but ended up being my favorite part. If you have gray mittens, you can just sew the pink paws onto them instead of making the mittens themselves, but for some reason I find that hand stitching a pair of mittens is less stressful than going out shopping to find a pair.

mousecostume2

I used Corban’s mittens as a pattern and cut a mitten shape about 1/4-inch larger than them. Then for each mitten I hand sewed two pieces of mitten-shaped felt together. If you have a sewing machine this will only take a minute, but it took me a couple episodes of “The Mindy Project.”

mousecostume3

I turned the stitched mittens inside out and prayed that they would fit Corban (he was still sleeping). Then I cut a few rough circles of pink felt and stitched them onto the palms of the mittens.

mousecostume4

Lastly, the tail. For this, I just hot-glued some pink felt into a roll, including in the middle of the roll a thin piece of wire we had lying around. I ended up making the tail way too long (this is what happens when your child is not in your range of vision — you forget how short he is!) so I pinned it pretty high up inside the back of his jacket once he was wearing it.

mousecostume5

For the nose and whiskers, first I tested out some homemade, all natural face paint by mixing a little bit of baby lotion with cocoa powder (for brown) and frozen raspberries (for pink). I did not want to put face paint on my babies for fear of exposing their gentle skin to potentially dangerous chemicals.

The homemade face paint was a giant fail! If there were a natural way to make black face paint, that would be one thing, but the brown just looked like chocolate (or you-know-what) on my face when I tested it. The pink actually turned out OK, but I don’t think it would have lasted very long on Corban’s or Mara’s noses.

So I went the eyeliner route instead. I’m sure there are chemicals I don’t want to know about in eyeliner, but I just told myself since it’s made to be applied near one of our most sensitive areas (the eyes) it can’t be that bad on baby cheeks and noses.

63687_10101810503922580_2090726927_n

My little kitten wore cat ears we already had, a black onesie, black tights and a small boa tail.

maracat

Trick-or-treating was on Sunday in our city (I know, the Milwaukee area is weird and every city has its own trick-or-treat day and time, which is often not on Halloween). We went with friends who have two toddler girls and it was such a blast watching the little ones scramble up to each door on our street and reach their mittened little hands into bowl after bowl full of candy.

halloween2013

maracat2

Corban also helped me carve our big pumpkin that afternoon.

fallfun15

It all reminds me once again what a fun age he is at.

mousecostume

Your turn: What are your little ones being for Halloween? Or what were you as a toddler? Toddler Halloween is the cutest!